Advanced Scopes And Probes Help Optimize SMPS Gate Drives For EMC Focus: The Institute of Electronics (IFE) at the Graz University of Technology is conducting
electromagnetic compatibility (EMC) research on gate-drive methods with a view to minimizing
spurious emissions (EMI) produced by fast-switching wide-bandgap power devices. High
performance oscilloscopes such as the R&S RTO2000 enable these optimization measures to be
implemented on the developer's lab bench. This article describes the oscilloscope measurements
necessary for gate-drive optimization and offers some measurement examples to illustrate the
setups and measurement results that can be obtained. Among the topics discussed are the use of
scope features to observe the effects of modified gate-drive waveforms and spread spectrum
modulation on the emissions spectrum, the use of near-field probes to locate sources of
interference, and the use of differential high-voltage probes to assess power loss across a
semiconductor component. The article concludes by briefly describing IFE’s research into
simulation tools for predicting the EMC behavior of an electronic device and then proposing
circuit design changes to reduce the emissions.
What you’ll learn: - How to observe effects of changes in power supply gate drive on the emissions spectrum
- How to use advanced oscilloscope features to identify and troubleshoot EMI
View the Source
Author & Publication: Michael Fuchs, Bernhard Auinger and Lukas Pichler, Institute of Electronics (IFE) at the Graz University of Technology, Styria, Austria; Markus Herdin, Rohde & Schwarz, Munich, Germany; and Bernd Deutschmann, IFE, Styria, Austria , How2Power Today, Aug 15 2019
|
This article summary appears
in the HOW2POWER Design Guide.
The Design Guide offers
organized access to
hundreds of articles
on dozens of power conversion
and power management topics.
The Design Guide search results
include exclusive summaries
and accurate "how to" analysis
to help you make faster,
more informed decisions.
Search
for more
articles
|