| Accurately Measuring High Currents With A Precision Current Sense Amplifier | 12/15/25 |
| How Active EMI Filter ICs Reduce Common-Mode Emissions In Single- And Three-Phase Applications (Part 4): Loop-Gain Analysis | 06/15/24 |
| How Active EMI Filter ICs Reduce Common-Mode Emissions In Single- And Three-Phase Applications (Part 1): An Overview | 11/15/23 |
| A Four-Decade, Integrated Current-Sensing Solution With Extended Supply Range | 04/15/21 |
| Sense Current Over A Wider Range For Better Battery Management | 07/15/19 |
| Optimizing Thermistor Placement For Accurate Power-Plane Current Sensing | 12/18/18 |
| Managing Pulse Top Decay Improves Accuracy Of Current Sensing Circuits | 11/15/18 |
| Lossless Method Boosts Current-Sense Signal | 06/15/18 |
| Using Duty Cycle To Detect Power Supply Overload (Part 1): Why It's Needed | 04/17/17 |
| Four-Terminal Inductor Achieves High-Accuracy Current Measurements For POLs (Part 2): Sources Of Error | 07/15/16 |
| Four-Terminal Inductor Achieves High-Accuracy Current Measurements For POLs (Part 1): Inductor Design | 02/16/16 |
| Tips And Tricks For High-Speed, High-Current Measurement | 01/15/16 |
| Reading Between the Lines, Using data sheets correctly when selecting resistors | 01/01/16 |
| Sense Power Switch Current Without Increasing Losses Or Parasitics | 11/15/14 |
| Design Considerations For DCR Current Sensing In Boost Converters | 03/15/14 |
| Inductor DCR Current Sensing With Temperature Compensation: An Accurate, Lossless Approach For POL Regulators | 11/15/13 |
| Making Sense of Two-Wire Current-Sense Resistors | 07/30/12 |
| The Over-Power Phenomenon In DCM/CCM-Operated Flyback Converters (Part 1) | 10/22/10 |
| Reverse-Current Phenomenon in Synchronous Rectifiers | 02/19/10 |
| Current-Sense Transformer Application Design Guidelines | 10/26/09 |
| Switch Mode Power Supplies and their Magnetics | 10/26/09 |
| Simple Ways to Measure Current | 03/13/09 |
| Constant, Off-time, Buck-based, LED Drivers Using the HV9910B | 02/25/09 |
| Charging for Ultracapacitors | 02/24/09 |
| Using Copper Traces As Ballast Resistors Ensures Balance | 11/17/08 |
| Unconventional Use Of An Output Driver Protects Current Monitor | 04/10/08 |
| Protect Current-Sense Amplifiers Against Overvoltage Transients | 10/25/07 |
| Digital Control Squeezes 40 A from Buck Converter | 08/01/07 |
| A New Way to Model Current-Mode Control, Part One | 05/01/07 |
| Digital Power Is Mostly Analog | 01/01/06 |
| ICs Protect IGBTs and Sense Currents in Motor Drives | 04/01/05 |
| Automatic Routine Speeds Power-Supply Calibration | 03/01/05 |
| Overpower Compensation for Current-Mode Supplies | 09/01/04 |
| Modified DCR Current Sensing Expands Inductor Choices For Peak-Current-Mode Buck Regulators | 12/15/25 |
| Average Value Extractor Is More Precise Than Low Pass Filters | 12/15/25 |
| Motor Control For Designers (Part 4): PMS Motor Electrical Model | 11/14/25 |
| Integrator Feedback Resistor — Adverse Or Friendly? How To DC Stabilize An Integrator Output | 11/14/25 |
| Why Couple The Windings In A SEPIC? | 11/14/25 |
| Current-Mode Controlled DC-DC Regulators (Part 4): Small-Signal Behavior Of The CC Loop | 10/15/25 |
| Controlling Rogowski Sensor Frequency Response Through Integrator Design | 10/15/25 |
| Motor Control For Designers (Part 3): Torque-Current Relationship | 10/15/25 |
| The Ćuk Integrated Magnetics Converter With Current Ripple Cancellation: The Optimal Power Conversion Topology? | 10/15/25 |
| Stackable Buck Regulators Simplify Multiphase Design | 09/15/25 |
| Energizing Output Filter Inductor Enables Instantaneous PSU Activation | 09/15/25 |
| Motor Control For Designers (Part 2): Electromagnetic Force Production In Motors | 08/15/25 |
| Better Core Geometry Is Why Planar Magnetics Win | 08/15/25 |
| Non-Inverting Integrators Are Not Really Integrators (Part 3): Impact On Rogowski Sensors | 07/15/25 |
| Optimized Magnetics Winding Design (Part 2): Minimized Winding Resistance For Constant Layers Or Strands | 07/15/25 |
| Measuring Loop Response Of Regulators With Inaccessible Feedback Resistor | 06/13/25 |
| MLCCs Are At The Forefront Of Capacitor Miniaturization | 05/15/25 |
| Optimized Magnetics Winding Design (Part 1): A Discovery Over Fifty Years Late | 05/15/25 |
| Designing An Open-Source Power Inverter (Part 25): Boost Or Buck For Converters That Increase Voltage? | 04/15/25 |
| Exploring Advanced Configurable Logic For Current, Voltage And Power Measurement | 04/15/25 |
| Protect And Enhance High-Power Designs With Integrated Solid-State Isolators | 03/14/25 |
| Current Mode-Controlled DC-DC Regulators (Part 3): CC-CV Regulation | 02/14/25 |
| Designing An Open-Source Power Inverter (Part 23): Inverter Driver Design Refinement | 01/15/25 |
| Dynamic Load Stepping: A New Paradigm For Determining GPU/ASIC Power Rail Stability And Impedance | 12/15/24 |
| Current Mode-Controlled DC-DC Regulators (Part 2): Loop Compensation And Load Transient Performance | 12/15/24 |
| Current Mode-Controlled DC-DC Regulators (Part 1): A Review Of Small-Signal Behavior | 11/15/24 |
| Output Filter Capacitor Size Depends On Inductor Value | 11/15/24 |
| Designing An Open-Source Power Inverter (Part 21): Converter Inductor Winding Design | 11/15/24 |
| Deriving The Control-To-Output Transfer Function Of The Weinberg Converter | 10/15/24 |
| Designing An Open-Source Power Inverter (Part 19): Controller Design For The Battery Converter | 09/13/24 |
| Can Foil Folding Improve Winding Performance In Transformers? | 09/13/24 |
| Measuring Accurately To 10 MHz With Fluxgate Balanced-Core Current Transducers | 08/15/24 |
| Designing An Open-Source Power Inverter (Part 18): Transformer Winding Design For The Battery Converter—Secondary Winding Design | 07/15/24 |
| A Guide To Designing Your Own Rogowski Sensor (Part 3) | 06/15/24 |
| Characterizing Dynamic COSS Losses in 600-V GaN HEMTs | 05/15/24 |
| A Guide To Designing Your Own Rogowski Sensor (Part 2) | 05/15/24 |
| A Guide To Designing Your Own Rogowski Sensor (Part 1) | 04/15/24 |
| Quantifying The Impact Of Series Inductance On E-Load Edge Rates And Current Monitoring Accuracy | 04/15/24 |
| Optimizing Winding Design For Low-Resistance Windings—Selecting Wire Or Bundle Size To Fill The Core Window | 02/15/24 |
| Maximizing Power-Transfer Efficiency Over A Current Range | 12/15/23 |
| Design Considerations For High-Speed Three-Phase PMSM Motor Drives For Consumer Home Appliances | 11/15/23 |
| Inductor Saturation Model Supports Analysis Of Inductor And Transformer Designs | 11/15/23 |
| Stiff Voltage Clamping Reduces Input Current Ripple In Single-Ended Converters | 04/15/23 |
| Do Eddy Current Effects And Self Heating Cause Distortion In Audio Cables? | 01/15/23 |
| Getting The Most From The Improved Howland Current Pump: Output Impedance | 12/15/22 |
| Using Current Transformer In Core Saturating Mode Enables DC Current Measurements | 10/14/22 |
| Roshen’s Models Offer An Advanced Approach To Modeling Core Losses | 09/15/22 |
| Stepdown Voltage Regulator With Reduced Input Current Ripple | 08/15/22 |
| A Guide To Power Electronics Design For Off-Battery Automotive (Part 2): DC-DC Conversion From 12 V | 06/15/22 |
| Adjust The Output Of An Inverting Buck-Boost Regulator Without Level Shifting | 05/13/22 |
| Calculating Minimum Magnetic Core Size For A Transformer | 05/13/22 |
| SEE Testing On GaN FETs—Interpreting Results For Space Power Applications | 04/15/22 |
| Wide-SOA Trench MOSFET Enables Rugged Linear-Mode Operation | 04/15/22 |
| Improving Solar Inverter Reliability: Techniques For Protecting Output Power Switches | 01/14/22 |
| Resonant Current Source Powers Arbitrary Load | 01/14/22 |
| A Simplified Winding Design Procedure For Transformers | 01/14/22 |
| Modern Control Methods For LLC Converters Simplify Compensator Design | 12/15/21 |
| Stored Energy In A Saturating Inductor Is Not Constant | 11/15/21 |
| Understanding Supercapacitor Discharge Into A Constant Power Load | 10/15/21 |
| Smart Gate Driver IC Simplifies Motor Drive Design In Battery-Powered Applications | 09/15/21 |
| A Standalone Controller Eases Compliance With USB PD Standards | 09/15/21 |
| Zener Diode Selection For Faster Inductor Reset in Solenoid Circuits | 08/15/21 |
| Space-Grade Tantalum Polymer Caps Deliver Lower ESR And Better Current Handling For Bulk Capacitor Applications | 08/15/21 |
| Techniques For Safely Paralleling MOSFETs In Linear Circuits | 06/15/21 |
| Developing A 25-kW SiC-Based Fast DC Charger (Part 3): PFC Stage Simulation | 06/15/21 |
| Raising The Plateau Level In Valley-Fill PFC Circuits Improves Efficiency | 05/15/21 |
| Developing A 25-kW SiC-Based Fast DC Charger (Part 2): Solution Overview | 05/15/21 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 17): Active And Hybrid Filter Circuits | 04/15/21 |
| Safety On The Bench: Hazards And Precautions In The Power Electronics Lab | 04/15/21 |
| Comparator Design: User-Defined Threshold With Asymmetrical Hysteresis | 03/15/21 |
| Simulation Demonstrates Impact Of Current-Loop Crossover Frequency On Stability | 01/15/21 |
| Don’t Let Current Sources And Grounds Derail Your Spice Simulations | 01/15/21 |
| Using Volt-Second Integral Instead Of Winding Current To Predict Saturation | 01/15/21 |
| Modeling Digitally Controlled PFCs Made Easy | 12/15/20 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 16): Common-Mode Input Filter Design | 12/15/20 |
| Determining Design Power Over An Input Voltage Range (Part 1): Maximum Inductor Power | 11/16/20 |
| Avoiding Thermal Runaway In Schottkys Is Key To More Reliable And Efficient Designs | 10/15/20 |
| Foil Vs. Wire Windings—How Do They Differ? | 10/15/20 |
| A Flexible Design For Fast Charging Supercapacitors In Industrial Applications | 09/15/20 |
| Highly Efficient LED Driver Tackles COVID But Also Benefits Lighting Applications | 08/14/20 |
| More About No-Load Operation In Current Transformers—Creating Real World Models | 08/14/20 |
| Interstitial Wire Interleaving Packs More Conductor Into Magnetic Windings | 07/15/20 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 13): Predicting the Common-Mode Conducted Noise Spectrum | 06/15/20 |
| Novel 54-V to 12-V Buck Topology Eases Efficient Power Delivery In Data Centers | 05/15/20 |
| Understanding Core Magnetization In Current Transformers—Avoiding Saturation And Dangerous Output Voltage | 05/15/20 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 12): Predicting The Differential-Mode Conducted Noise Spectrum | 04/15/20 |
| How To Make Sense Of Sense Resistors | 04/15/20 |
| Choosing The Best Operating Mode In An Ultra-Low-IQ Buck Converter | 04/15/20 |
| Current Drive Can Overcome Pitfalls Of Class D Audio Amplifiers | 03/13/20 |
| Determining Whether A Film Capacitor Can Handle One AC Voltage Imposed On Another | 03/13/20 |
| PFC (Part 2): How Current Harmonics Cause Distortion And The Role of the Delta-Wye Transformer | 03/13/20 |
| A Guide To Second Sourcing Rectifiers | 01/17/20 |
| Deflux Windings Benefit Forward Converters But Not Flybacks | 01/17/20 |
| Integrated Current Limiter Eases Power Protection In High-Voltage Space Applications | 12/13/19 |
| How To Drive Rad Hard E-Mode GaN Transistors Efficiently And Safely | 11/15/19 |
| Flyback Magnetics: Winding-Current Transition Is Key To Efficiency | 11/15/19 |
| Maintaining Battery Safety And Life Of Battery Are Top Priorities In Battery Charger Design | 11/15/19 |
| Magnetics Utilization Vs. Converter Topology: A Little Extra Silicon Goes A Long Way | 10/17/19 |
| Selecting An AC Line Filter For Switching Power Supply Applications | 10/17/19 |
| How To Select Bridge Rectifiers | 10/15/19 |
| Using Mini E-Loads To Emulate Fast Slew Rates And High Peak Power Levels | 09/16/19 |
| Secrets Of The Datasheet: What Rectifier Specs Really Mean | 09/16/19 |
| Versatile SiC JFETs Benefit Power Switching And Circuit Protection Applications | 08/15/19 |
| Measuring Common-Mode And Differential-Mode EMI Currents | 06/17/19 |
| Another Look At The Refined Model Of Current-Mode Control | 05/15/19 |
| How To Optimize Turns For Maximum Inductance With Core Saturation | 04/15/19 |
| Zero-Drift Precision Op Amps: Measuring And Eliminating Aliasing For More Accurate Current Sensing | 04/15/19 |
| How Ulta-Low IQ Boost Converters Extend IoT Device Runtime | 04/15/19 |
| How To Thermally Model Magnetic Components | 03/15/19 |
| Using Power Delivery Path Resistance For Precision CPU Current Monitoring | 02/15/19 |
| How Wire Bundle Configurations Influence Eddy-Current Proximity Effects | 02/15/19 |
| Designing Energy Storing Inductors Properly | 01/16/19 |
| Need Uninterrupted Power? Let A Supercapacitor Come To The Rescue | 12/18/18 |
| Proper Design Of The Power Supply’s Input EMI Filter Protects Against Power Line Transients | 12/18/18 |
| Configurable ICs Build Versatile, Low-Cost Regulated Charge Pumps | 11/15/18 |
| Interbundle Penetration Of Wire Bundles Improves Their Packing Factor | 11/15/18 |
| Optimizing Regulator Output Capacitance (Part 2): Using Load Slammers | 09/14/18 |
| Optimizing Transformer Winding Design For Max Efficiency Over Output Current Range | 09/14/18 |
| Adaptive Overpower Protection Prevents Overheating In Power Distribution Networks | 08/16/18 |
| Simple Solar Tracking Sensor Is Self-Powered | 08/16/18 |
| Selecting An Inductor Value For A DC-DC Boost Converter | 07/16/18 |
| The Geometry Of Twisted Wire Bundles | 07/16/18 |
| Calibration Of Copper Sensors Enhances Accuracy Of Nonintrusive Current Monitoring | 06/15/18 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 5): Mitigation Techniques Using Integrated FET Designs | 06/15/18 |
| Bundle Compression Overcomes Aspect Ratio Constraints On Transformer Design | 06/15/18 |
| Dual Buck Doubles The Duty Cycle For Ultra Low-Voltage Applications | 05/16/18 |
| Achieve Precise High Current Monitoring Using Standard Surface-Mount Resistors | 05/16/18 |
| Inrush Current Tester Enables More Thorough Validation Of Server Power Supplies | 04/17/18 |
| Automatically Shift Seemlessly Between Peak And Valley Current Modes | 04/15/18 |
| Estimating Output Current Tolerance Of A Primary–Side-Regulated Constant-Current Flyback Converter (Part 3): Extreme Value Analysis And Sensitivity Analysis | 03/21/18 |
| SEPIC Converter Simplifies Design Of Smart Electronic Loads | 02/16/18 |
| Estimating Output Current Tolerance Of A Primary–Side-Regulated Constant-Current Flyback Converter (Part 2): Monte Carlo Analysis | 02/16/18 |
| EMI For Wisdom Seekers (Part 4): Minimizing Parasitic Current Loops | 02/16/18 |
| Transformer Design (Part 2): Aspect Ratio | 02/16/18 |
| Estimating Output Current Tolerance Of A Primary–Side-Regulated Constant-Current Flyback Converter (Part 1): The Analytical Model | 01/15/18 |
| High-Power Wireless Charging Of Heavy Duty EVs: Techniques, Challenges And Limitations | 12/15/17 |
| The Engineer’s Guide To EMI In DC-DC Converters (Part 1): Standards Requirements And Measurement Techniques | 12/15/17 |
| A New Method Of Winding Design Optimization (Part 2): Optimal Window Magnetic Operating Points | 10/16/17 |
| Cut Your Losses–With an Active Diode | 09/15/17 |
| Control Method For Quasi-Resonant Flyback Converters Achieves Unity Power Factor With Zero THD | 09/15/17 |
| A New Method Of Winding Design Optimization (Part 1): Window Geometry And Eddy-Current Plots | 09/15/17 |
| Receiver Chip Implements Efficient, Flexible Wireless Charging For Wearables | 08/15/17 |
| Boosting Efficiency, Reliability And Affordability Of EV-Drivetrain Power Modules | 07/15/17 |
| Smart High-Side Switches Ease Safety Compliance For Industrial IoT | 07/15/17 |
| Optimize Power MOSFET Performance In Motor Drive Designs | 07/15/17 |
| Magnetic Component Theory Is Simpler If You Grasp Reference Frames | 06/15/17 |
| Meeting the power demands of battery supplied automotive electronics | 05/26/17 |
| A Practical Primer On Motor Drives (Part 15): Low-Pass And Harmonic Filtering Of Power Measurements | 04/17/17 |
| Eddy-Current Effects In Magnetic Design (Part 6): Winding Bundles | 03/17/17 |
| A Practical Primer On Motor Drives (Part 14): Power Measurements On Distorted Signals | 03/15/17 |
| Understanding Op Amp Dynamic Response In A Type-2 Compensator (Part 2): The Two Poles | 02/17/17 |
| Fast, Simple Solenoid Driver Saves Power In Industrial Applications | 02/17/17 |
| Eddy-Current Effects In Magnetic Design (Part 5): Winding Design Optimization | 02/17/17 |
| A Practical Primer On Motor Drives (Part 12): Variable Frequency Motor Drives | 01/16/17 |
| Eddy-Current Effects In Magnetic Design (Part 4): Dowell's Formula | 01/16/17 |
| How to select a space-grade switching regulator | 12/08/16 |
| Eddy-Current Effects In Magnetic Design (Part 3): Conductor Cross-Sectional Geometry | 10/17/16 |
| A Practical Primer On Motor Drives (Part 9): Power Semiconductors As Implemented In Power Conversion Systems | 10/15/16 |
| Multi-Output Fly-Buck Regulator Offers Wide VIN, Isolation And Low EMI | 09/15/16 |
| Eddy-Current Effects In Magnetic Design (Part 2): The Proximity Effect | 09/15/16 |
| "Cap Drop" Approach Implements Offline Power Supply for Light Loads | 09/12/16 |
| Modeling Magnetic Core Offers Insight into Behavior, Operating Range, Saturation | 09/09/16 |
| The five main reasons power supplies fail—and what can be done about it | 08/18/16 |
| Eddy-Current Effects In Magnetic Design (Part 1): The Skin Effect | 08/15/16 |
| Subharmonic Behavior In Current Mode Control (Part 2): The Causes And Cures At Low Duty Cycles | 07/15/16 |
| A Practical Primer On Motor Drives (Part 6): AC Line Power Calculations | 07/15/16 |
| A Practical Primer On Motor Drives (Part 5): Three-Phase AC Line Current And Winding Configurations | 06/15/16 |
| Smart Inrush Current Limiter Enables Higher Efficiency In AC-DC Converters | 05/16/16 |
| Subharmonic Behavior In Current-Mode Control (Part 1): The Causes And Cure At High Duty Cycles | 05/16/16 |
| A Practical Primer On Motor Drives (Part 4): Single-Phase AC Line Current | 05/16/16 |
| Metal Alloy Resistors Offer Robustness And Other Benefits For Current Sensing | 05/16/16 |
| How to Design for Power Integrity: Selecting a VRM | 05/05/16 |
| A Practical Primer On Motor Drives (Part 2): Single-Phase AC Line Voltage | 03/15/16 |
| Improving Loop-Gain Performance In Digital Power Supplies With Latest-Generation DSCs | 03/15/16 |
| Vertically Stacked MOSFETs And Other Tricks For Building A High-Density 30-A Point-of-Load Regulator | 03/15/16 |
| How It Works: The Current Doubler Demystified | 02/16/16 |
| Modeling The Effects of Leakage Inductance On Flyback Converters (Part 3): The Small-Signal Model | 01/15/16 |
| Modeling The Effects of Leakage Inductance On Flyback Converters (Part 2): The Average Model | 12/17/15 |
| Modeling The Effects of Leakage Inductance On Flyback Converters (Part 1): Converter Switching | 11/16/15 |
| An Introduction to Resonant Inductive Power Transfer | 11/10/15 |
| Selecting Power Supplies for Medical Equipment Designs | 10/16/15 |
| Leakage Inductance (Part 1): Friend Or Foe? | 10/15/15 |
| Magnetics Optimization (Part 2): Maximum Power Transfer Of The Primary-Referred Circuit | 09/16/15 |
| Novel GIT Structure Solves Current Collapse In GaN Power HEMTs | 09/15/15 |
| Optimizing The Efficiency Of The Four-Switch Buck-Boost Converter | 09/15/15 |
| Understanding Evolution Of SiC Schottkys Is Key To Device Selection | 08/17/15 |
| Testing power supplies for medical applications | 08/10/15 |
| Efficiency Standards for External Power Supplies | 08/06/15 |
| Designing Offline LED Drivers With GaN | 07/15/15 |
| Infrared Light-Based Battery Charging And Communications May Improve Convenience And Robustness Of Implantable Medical Devices | 06/15/15 |
| Take The Edge Off High dV/dt Supplies | 05/15/15 |
| Nano-Magnetics For High Efficiency Power Supplies | 05/15/15 |
| Interface Panel Addresses Special Connection Challenges In On-Wafer Testing Of Power Semiconductor Devices | 03/13/15 |
| Choose The Right Regulator For The Right Job (Part 1) | 02/15/15 |
| The inductive nature of voltage-control loops | 02/05/15 |
| Mission IGBT: Understanding And Specifying IGBT Modules | 12/15/14 |
| Bandgap Voltage Reference Achieves High Performance At Low Supply Voltages | 12/15/14 |
| Actively Managed Storage Capacitor Offers Host Of Benefits In AC-DC And DC-DC Applications | 11/15/14 |
| 3D FEA Software Solves Tough Inductive Noise Problems | 10/15/14 |
| Latest Generation Of 3D Electromagnetic Finite Element Analysis Software With Breakthrough Simplicity Facilitates Magnetic Component Design | 09/15/14 |
| Inductance-Measuring Algorithms Speed Start Up Of Sensorless BLDC Motors | 08/15/14 |
| Battery Impedance Measurement | 07/16/14 |
| Enhanced OTA Models Improve Design Of Feedback Compensation Networks | 07/15/14 |
| Current-Mode Control Stability Analysis For DC-DC Converters (Part 2) | 07/15/14 |
| Ripple Steering Can Enhance Magnetics Circuit Function Through Ripple Reduction | 07/15/14 |
| Current-Mode Control Stability Analysis For DC-DC Converters (Part 1) | 06/13/14 |
| Synchronous Zeta Converter Outperforms The SEPIC | 05/15/14 |
| On-Chip Drivers Enable High-Current, Normally Off GaN Transistors (Part 1) | 05/15/14 |
| Selecting the Best Power Device for Power Electronics Circuit Design through Gate Charge Characterization | 05/12/14 |
| The Small-Signal Model Of An Active-Clamp Forward Converter (Part 3): Active-Clamp Forward Converter Transfer Function | 04/15/14 |
| A Technique For Troubleshooting Clock Jitter Associated With Power Supply PDN Performance | 04/01/14 |
| Linear voltage regulator for space applications | 03/26/14 |
| SEPIC-Fed Buck Topology Boosts Performance in Non-Isolated DC-DC Converters | 03/01/14 |
| Control Circuit Simplifies PFC Boost Converter Design | 02/15/14 |
| USB Charger Provides Battery Backup And Load Switching With Easy, Low-Cost Design | 02/15/14 |
| RoHS and Power MOSFETs: An Evolving Standard Influences Package Selections Now And In The Future | 01/16/14 |
| Single-Stage PFC Topology Employs Two-Transformer Approach For Improved Efficiency, Reliability, And Cost | 12/16/13 |
| High-performance resistors in custom power supplies | 11/19/13 |
| Everything You Wanted To Know About Copper Wire But Didn't Know To Ask | 11/15/13 |
| Troubleshooting Distributed Power Systems (Part 5): Using Current Injectors | 10/15/13 |
| Enhancing RF system efficiency with bypass mode in hysteretic step-down converters | 10/04/13 |
| Five things every Engineer should know about PDN | 10/02/13 |
| Primary-Side, Constant-Voltage Regulation Enables Two-Stage LED Driver With High-Performance And Low Cost | 09/15/13 |
| Closed-Loop Sensors With Magnetic Probe Extend High-Precision Current Measurement To Higher Current Levels | 07/15/13 |
| How Not To Observe Magnetic Saturation | 07/15/13 |
| New Twist On The Half-Bridge Converter Solves Subtle Failure Mode | 06/14/13 |
| Boost Power Converters Finally Get Some Respect! | 06/14/13 |
| IGBT With Intrinsic Body Diode Improves Performance Of Single-Ended-Resonant Inverters In Induction Heating Applications | 05/15/13 |
| Digital current balancing for an interleaved boost PFC | 04/01/13 |
| Measuring and sourcing DC transients and other DC test conditions | 03/09/13 |
| Simplified Analysis Of A DCM Boost Converter Driving An LED String Part I: Theoretical Analysis | 02/15/13 |
| How To Choose Between Ferrite Or Powdered-Iron Cores: A Case Study | 02/15/13 |
| Simple, Yet Versatile Flybacks Present Low-Cost Driver Solutions For LED Lighting | 01/18/13 |
| Impact Of High-Performance Computing Technology On Power Conversion | 12/20/12 |
| How To Minimize Core Saturation | 11/21/12 |
| Beyond Power Management: Power Engineers Must Also Solve ESD, EMI, And RFI Problems | 11/21/12 |
| Frequency-Foldback Technique Optimizes PFC Efficiency Over The Full Load Range | 10/25/12 |
| Wireless power technology embraces user-friendly features | 10/12/12 |
| New Topology Cuts Size, Improves Performance of PV Inverters | 10/01/12 |
| A More-Efficient Half-Bridge LLC Resonant Converter: Four Methods For Controlling The MOSFET | 09/28/12 |
| How high-TJ TRIACs benefit your applications | 09/12/12 |
| The Truth about Amps Rating in Motor Controller Chips and Systems | 09/09/12 |
| Non-Dissipative Control Saves Power And Cost In Stepper Motor Applications | 08/30/12 |
| An introduction to benchtop dc power supplies | 08/28/12 |
| Low Power, High Efficiency Can Degrade Performance Significantly | 08/01/12 |
| IGBT Devices And Modules Evolve To Address Inverter Design Challenges In Electric And Hybrid-Electric Vehicles | 06/29/12 |
| Understanding The Data Sheet Key To Effective Circuit Design | 06/27/12 |
| Power Conversion System Architectures for Smart Grid Energy Storage | 06/21/12 |
| More Boost With Less Stress: The SEPIC-Multiplied Boost Converter | 05/24/12 |
| Why Use The Refined Model Of Current-Loop Converter Control? | 05/24/12 |
| Internal LDO Circuit Offers External Control Of Current Limiting | 05/24/12 |
| How To Correct Voltage Imbalance In Half-Bridge Converters Under Current-Mode Control | 04/30/12 |
| Current Limiting Resistors for LEDs | 04/24/12 |
| Exploiting the high temperature promise of SiC | 04/03/12 |
| Measuring Wireless Power Charging Systems for Portable Electronics | 04/01/12 |
| Current-Loop Control In Switching Converters Part 7: Fm0 In Models | 03/30/12 |
| An Unconditionally Stable Linear Voltage Regulator | 03/23/12 |
| Current-Loop Control In Switching Converters Part 6: Slope Compensation | 02/29/12 |
| Are We Focused On The Wrong Reference Parameters? | 01/31/12 |
| Current-Loop Control In Switching Converters Part 5: Refined Model | 01/27/12 |
| System-On-Chip Architecture Raises Performance Of Microstepping Motor Driver Designs | 01/27/12 |
| When Bode Plots Fail Us | 01/20/12 |
| Current-Loop Control In Switching Converters Part 4: Clarifications Of Existing Models | 12/22/11 |
| Operation of a New Half-Bridge Gate Driver for Enhancement-Mode GaN FETs, Type LM5113, Over a Wide Temperature Range | 12/01/11 |
| Current-Loop Control in Switching Converters Part 3: Waveform-Based Model Dynamics | 11/30/11 |
| New Hardware-in-the-Loop Platform for Rapid Development of High-Reliability EV and HEV Propulsion Drives | 11/01/11 |
| Understand and reduce DC/DC switching-converter ground noise | 11/01/11 |
| Current-Loop Control In Switching Converters Part 2: A Waveform-Based Model | 10/27/11 |
| A Holistic Approach To Reducing Backlight Power Consumption | 10/27/11 |
| Current-Loop Control In Switching Converters Part 1: Historical Overview | 09/27/11 |
| Circuit Implements Low-Cost Ballast Control With High Power Factor | 09/27/11 |
| PaytonTechV1Review: Benefits of Planar Magnetics | 09/16/11 |
| New Technique for Non-Invasive Testing of Regulator Stability | 09/01/11 |
| A Simple Method to Determine ESR Requirements for Stable Regulators | 08/04/11 |
| Solar Microconverter Implements Novel MPPT Algorithm | 06/24/11 |
| MOSFET Package Technology Enhances Performance Of Motor Drives | 05/27/11 |
| Eliminate The Guesswork When Selecting Primary Switch VDD Capacitors | 05/27/11 |
| Energy Meter Design Operates Accurately Over Wide Current Range | 05/27/11 |
| XRP77XX: Extending the MOSFET Gate Drive Conductors | 05/02/11 |
| Single-Stage Flyback LED Driver Meets Class C Limits on Harmonic Currents | 04/29/11 |
| Power Supply Measurement Techniques Using Picotest Signal Injectors | 03/13/11 |
| Utilizing Full Saturation and Power Loss To Maximize Power Transfer In Magnetic Components | 02/28/11 |
| Primary-Side Current Monitoring Won’t Stop Overcurrents In DCM-Operated Flybacks | 02/28/11 |
| The Over-Power Phenomenon in DCM/CCM-Operated Flyback Converters (Part 4): The Leakage Inductor Contribution | 01/31/11 |
| The Over-Power Phenomenon in DCM/CCM-Operated Flyback Converters (Part 3): Quasi Square-Wave Resonant Mode | 12/16/10 |
| Current Flow Analysis in Permanent Magnet Brushless DC (BLDC) Motor Control Using PSpice | 12/16/10 |
| The Over-Power Phenomenon in DCM/CCM-Operated Flyback Converters (Part 2): Fixed-Frequency CCM Operation | 11/23/10 |
| How2 Understand eGaN Transistor Reliability | 10/22/10 |
| Flexible Power Transmission | 09/01/10 |
| SIMPLIS Simulation Tames Analysis of Stability, Transient Response, and Startup For DC-DC Converters | 08/19/10 |
| Rediscovering The Integrated-Magnetics Isolated Ćuk Topology | 07/30/10 |
| Methods measure power electronics efficiency | 07/29/10 |
| Grid-Connected Solar Microinverter Reference Design Using a dsPIC Digital Signal Controller | 07/15/10 |
| Managing the power in wireless sensor networks powered by energy-harvesting circuitry | 06/07/10 |
| Effects of Load Changes On The Control-to-Output Transfer Function Of A Buck-Boost Converter In CCM | 05/27/10 |
| Power Supply Topology Selection--It's Not Just About Power | 05/27/10 |
| Build or Buy: tradeoffs | 05/10/10 |
| Why Struggle with Loop Compensation? | 04/30/10 |
| Basic Operation - Rogowski Current Transducers | 03/10/10 |
| Generating Stable Voltage For Multiple Applications | 03/09/10 |
| Small-signal Analysis, Modeling and Design of a Synchronous Buck-Converter in Voltage-Mode Control | 02/19/10 |
| Testing Military Grade Magnetics: Transformers, Inductors and Coils | 01/26/10 |
| Smart grid: Definition, road map and breadth of this grand challenge | 01/05/10 |
| Demystifying Current Ratings | 01/01/10 |
| A Practical Look At Current Ratings | 12/15/09 |
| Loop Control: Hand Calculations Or Automation? | 12/15/09 |
| What every designer should know about magnetics in switch-mode power supplies | 11/26/09 |
| Give Your Battery A Rest With A Supercapacitor-based Power Subsystem | 11/24/09 |
| Drive Multiple LED Strings with SEPIC Converters | 11/24/09 |
| Techniques for Measuring Efficiency | 10/29/09 |
| Push-Pull Output Inductor Design Using a LPT E2000Q Core | 10/28/09 |
| Definitions And Measurement Techniques For Transformers And Inductors | 10/26/09 |
| Ultracapacitors Give Lift to Material Handling | 10/22/09 |
| Switching-Regulator Insights: Achieving Longer Battery Life in DSP Systems | 09/17/09 |
| DC-DC Converter Output Ripple | 09/09/09 |
| What is Power Factor Correction and what are the tradeoffs in the various approaches to implementing it? | 08/03/09 |
| Don't Let Jitter Shake Up Your Flyback Converter Designs | 07/24/09 |
| Measuring Switching Regulator Noise | 07/02/09 |
| The Challenges of PoE+ | 06/01/09 |
| Choosing the right topology | 04/23/09 |
| SEPIC Converters Solve Automotive Power Needs Part 2 | 04/01/09 |
| Reduce the Cost and Complexity of Medium LCD LED Backlights with a Single Inductor LED Driver for 60 LEDs | 04/01/09 |
| Optocouplers Support High Power, High Speed Switching Inverters | 04/01/09 |
| Increasing PV Panel Energy Output | 03/31/09 |
| 3rd Generation Silicon Carbide Schottky Diodes Pave theWay for Energy Efficient Power Solutions | 03/30/09 |
| SEPIC Converters Solve Automotive Power Needs Part 1 | 03/01/09 |
| Want To Dim Your LEDs with a TRIAC Dimmer? | 03/01/09 |
| Digital controller compensates analog controller | 02/19/09 |
| Circuit provides constant-current load for testing batteries | 02/19/09 |
| Optimising PFC Boost Converter Design | 02/01/09 |
| Predicting Device Thermal Performance Using a Simulation Tool | 02/01/09 |
| SUPERCAPS Lighten the Load in LED Flash Applications | 01/01/09 |
| Thermal and Mechanical Considerations (A Vicor Power Techtorial) | 01/01/09 |
| DC-DC Converter Theory (A Vicor Power Techtorial) | 12/31/08 |
| Voltage vs. Current Mode Control Current Sharing in a PolyPhase DC/DC Converter | 12/08/08 |
| Minimize Losses in Solar Panels, Rectifier technology maximizes efficiency | 12/01/08 |
| Take-Back-Half' Convergence Algorithm Stabilizes Microhydro Turbine Controller | 10/02/08 |
| Direct Paralleling, High Power Density LDO | 10/02/08 |
| Low Noise, High Voltage DC/DC Converters | 10/02/08 |
| Silicon Carbide Diodes Make Solar Power Systems More Efficient | 10/01/08 |
| Simple PWM Modulator Allows DC Control Signal To Drive LEDs | 09/28/08 |
| Simple Ambient Light Sensor Controls White LED Driver | 09/25/08 |
| COT Drivers Control LED Ripple Current | 09/23/08 |
| Add On-Board Power Measurement Capability To Telecom Equipment | 07/24/08 |
| Inverter Design Shines in Photovoltaic Systems | 07/01/08 |
| Minimize Winding Losses in High-Frequency Inductors | 07/01/08 |
| Trick A BJT-Based Converter Into Starting At Only 250 mV DC | 06/26/08 |
| Programmable current source requires no power supply | 06/12/08 |
| PFC Circuit Halts Inrush Currents | 06/01/08 |
| Intelligent NiCd Charger Avoids Battery Damage From High Currents | 05/08/08 |
| Boosting Efficiency in Off-Line Power Converters | 05/01/08 |
| Precision voltage-controlled current sink tests power supplies | 03/20/08 |
| Snubber Measurement | 03/14/08 |
| Low Cost Dimmable LED Ballast Using the Valley Fill Current Shaping Circuit | 03/01/08 |
| Snubber Analysis with Rudy Severns | 02/25/08 |
| Single-supply circuit measures -48V high-side current | 02/21/08 |
| High Efficiency Constant Current Buck Converter for LED Lighting | 02/01/08 |
| 20 W Single Stage Flyback Power Supply With PFC for LED Ballasts | 02/01/08 |
| Bridgeless PFC Boosts Low-Line Efficiency | 02/01/08 |
| Capacitor Ripple Current Improvements | 01/04/08 |
| 0.5 W Non-Isolated Constant Current LED Driver | 01/01/08 |
| 1.25 W Non-Isolated Constant Current LED Driver | 01/01/08 |
| Expedite Transformer Calculations for Flybacks | 01/01/08 |
| SWITCHING MODE POWER SUPPLY (SMPS) TOPOLOGIES OVERVIEW, COMPARISON AND SELECTION GUIDE | 01/01/08 |
| How Transformers, Chokes and Inductors Work, and Properties of Magnetics | 01/01/08 |
| Constant-Current Source Creates Slope-Compensation Ramp In SMPS | 10/11/07 |
| Circuit limits dV/dt and capacitor inrush at regulator turn-on | 10/11/07 |
| A Digital Constant Current Power LED Driver | 10/05/07 |
| Drive A Resistive Heater Element Without Adding Noise To The System | 09/01/07 |
| Using Optical Feedback For Precise Intensity Control of LED Headlights | 09/01/07 |
| Designing Single-Switch, Resonant-Reset, Forward Converters | 08/07/07 |
| Simple and effective inrush-current limiter stops surges | 08/02/07 |
| Forward-Converter Design Leverages Clever Magnetics Part 2 | 08/01/07 |
| Driving LED lamps - some simple design guidelines | 08/01/07 |
| Forward-Converter Design Leverages Clever Magnetics Part 1 | 07/01/07 |
| Simple dual constant-current load tests low-current power supplies | 06/21/07 |
| Circuit breaker provides overcurrent and precise overvoltage protection | 06/07/07 |
| Current-Mode Vs. Voltage-Mode Control in Synchronous Buck Converters | 04/01/07 |
| Digital Resistor Sets Operating Power For Laser Driver | 03/15/07 |
| Minimize Input-Supply Ripple Current In LED Driver Applications | 03/01/07 |
| Current mirror improves PWM regulator's performance | 03/01/07 |
| Low-cost current monitor tracks high dc currents | 03/01/07 |
| DSCs Enable Field-Oriented Control for Washer Motors | 03/01/07 |
| ELECTRICAL SAFETY IN PC BASED MEDICAL PRODUCTS, INCLUDING CHANGES IN IEC 601-1 3RD ADDITION. Options and Solutions | 02/01/07 |
| Explore the Lesser-Known Benefits of Digital Power | 11/01/06 |
| Vacuum cleaner with Philips P89LPC901 | 08/10/06 |
| Selection Guide of SiC Schottky Diode in CCM PFC Applications | 08/01/06 |
| Buck-Converter Design Demystified | 06/01/06 |
| Sensorless Motor Control Simplifies Washer Drives | 06/01/06 |
| Scaling Design Methods To Improve Transformers | 10/01/05 |
| Impact of Burn-In on Power Supply Reliability | 09/01/05 |
| Inductor Current-Sensing Boosts Regulator Efficiency | 04/01/05 |
| Understanding power supply ripple rejection in linear regulators | 04/01/05 |
| Democratic Current Sharing Aids Redundancy | 03/01/05 |
| Sensorless Control For PMDC Motors | 02/01/05 |
| Easy Calculation Yields Load Transient Response | 02/01/05 |
| Buck Converter Losses Under the Microscope | 02/01/05 |
| Continuous Tracking Challenges DC-DC Converters | 02/01/05 |
| Power Amplifier Drives Multiple Inkjet Heads | 01/01/05 |
| IC Supports Primary-Side Power Monitoring | 01/01/05 |
| Analysis of Closed-Loop DC-DC Converters | 10/01/04 |
| Printed Wiring Board Manufacturing Advances | 09/01/04 |
| Reducing Wasted Startup Current in Offline Supplies | 08/01/04 |
| Simple, Reliable EN-Compliant Power System | 07/01/04 |
| Ramp Compensation for Current-Mode Converters | 07/01/04 |
| MOSFET Packaging Boosts Current Density | 05/01/04 |
| Power-Monitoring Circuits for Battery Performance | 05/01/04 |
| Inductor Current Rating for a Buck-Boost Converter | 05/01/04 |
| Magnetic Solutions: Solving Inrush at the Source | 04/01/04 |
| Tackling the Challenges of Power Dissipation | 04/01/04 |
| Program Streamlines Power Converter Simulation | 03/01/04 |
| Managing Currents in Dual- Synchronous Controllers | 03/01/04 |
| Current-Doubler Rectifier Reduces Ripple Current | 03/01/04 |
| Using a Current Mode PWM Controller in Voltage Mode | 01/01/04 |
| DSPs Simplify Digital Control Implementation of SMPS | 07/01/03 |
| New current-mode PWM controllers support boost, flyback, SEPIC, and LED-driver applications | 01/02/03 |
| Designing DC/DC converters based on SEPIC topology | 01/02/03 |
| Power Supply Engineer's Guide to Calculate Dissipation for MOSFETs in High-Power Supplies | 12/26/02 |
| POWER SUPPLIES - MAKE VS BUY | 10/23/02 |
| Improved Power Supply Rejection For IC Linear Regulators | 10/01/02 |
| DC-DC Converter Tutorial | 11/29/01 |
| Power Supply Design Checklist | 01/01/01 |
| Induction Heating System Topology Review | 07/01/00 |
| Switching Power Supply Topology, Voltage Mode vs. Current Mode | 10/01/94 |
| Planar Magnetic Component Development | 09/01/94 |
| HeNe Laser Power Supply | 08/01/94 |
| Efficiency and Power Characteristics of Switching Regulator Circuits | 11/01/91 |
| High Efficiency Linear Regulators | 03/01/89 |
| Introduction to Power MOSFETs And Their Applications | 12/01/88 |
| Performance Enhancement Techniques for Three-Terminal Regulators | 08/01/84 |
| Add Kelvin Sensing and Parallel Capability to 3-Terminal Regulators | 03/01/81 |
